Up Tayiba TT 2202 20W LED Outdoor Clamp Light – Flexible Gooseneck & 12V Clips

The Up Tayiba TT 2202 is a clamp-mounted outdoor LED work lamp. The light source is a rectangular COB panel marked 20W, set in a pale frame. A short black joint sits under the panel and meets a ribbed flexible gooseneck. That neck runs to a black spring clamp with wide jaws. Close the jaws on a suitable edge and the lamp stays there while you aim the panel.

Aiming uses both the neck and the head. The ribbed gooseneck bends and holds the curve you give it, so the panel can face the work from the clamped base. The head is also specified to rotate 360°, which turns the panel on the joint above the neck.

Power runs through a black lead to two battery clips, one with a red handle and one with a black handle. This is a 12V connection. Put the red clip on the positive terminal and the black clip on the negative terminal of a separate 12V supply.

The retail carton prints the brand Up Tayiba, the model TT 2202, and the words LED outdoor light. It also prints Protection Rating IP66. The lamp is presented as dust and water resistant under that rating, and the carton carries an energy-saving label. On light output over time, the box states that light decay is less than 5% after 10,000 hours of testing. The carton prints that line as the decay result for the stated test period.

The clamp and gooseneck are black. The COB panel, flexible neck, clamp base, and red-and-black battery-clip lead are packed together as one work light in the retail box.

• 20W rectangular COB LED panel
• 12V connection through red and black battery clips
• Red clip to positive and black clip to negative
• Flexible gooseneck
• Clamp mount base
• 360° rotation
• IP66 protection, described as dust and water resistant
• Light decay less than 5% after 10,000 hours of testing
• Energy-saving label on the box
• Black clamp and gooseneck

• COB LED panel
• Flexible gooseneck
• Clamp base
• Red and black battery-clip lead